Roof Decking, Steel Roof Deck and Floor Decking Panels

Roof Decking - Type "A" Deck
A Narrow rib decking roofing panel is designed to give maximum structural strength with a minimal cost. The sheets will nest into each other on the width side, for ease in installation. The A-Deck is usually offered in Painted or Galvanized using 18-20-22 gauge thickness.
Wide Roof Decking - Type "B" Deck
The B-Deck or B-Wide Rib panels are the most popular decking panels we offer. This standard panel can be used in all aspects of industry, as either roofing or siding material or for pouring concrete. The standard 1 ½" high 36" wide panel's come in a heavy (G-90) galvanized finish to eliminate any deterioration from the outside elements. The stocking sizes at Mechanical Metal, Inc. are either, 8', 10', or 12', but feel free to request over 20' in length. The standard gauges in stock would be the 18-20-22 thickness but others can be done as well. As the industry standard panel, this can be shipped with minimal lead times. The closure strips, fasteners, and any other accessories can be shipped quickly as well.
Floor Decking - Type "F" Deck
Type F deck, with its medium rib opening, is designed to provide the most economical combination of deck and insulation. Its nestable design eliminates the need to die-set ends and speed insulation.
Roof Decking - Type "N" Deck
Type N is a deep rib deck that is especially suited to the 10'0 to 15'0 span conditions. The long span capability of this section lends itself to canopy and other installations where a long clear span is desirable. This section is available in an acoustical version, galvanized finish.